Ext Wheel Bolt Set
***Actual product may differ from what is shown
Wheel Spacer Hardware Kits-M12x1.25-Conical
Extended Lug Bolt Set (10) - M12x1.25 Conical 60° seat, 17mm wrench, Silver, 39mm long We recommend ST wheel hardware for the installation of AZX & DZX Wheel Spacer systems . The wheel bolt length needed for your spacers must be calculated by adding the thickness of the wheel spacers to the lenght of the wheel hardware you used previously. In addition, the type of bolt head, seat type and thread pitch must be taken into consideration. If you are unsure of how to do this you can call our technical support department.
Important Notice! In all cases, the minimum thread engagement must be observed.
M12x1.25 at least 8.0 turns
M12x1.5 at least 6.5 turns
M12x1.75 at least 6.5 turns
M14x1.25 at least 9.0 turns
M14x1.5 at least 7.5 turns
1/2" at least 8.0 turns
Caution: Too long a wheel bolt may result in damage to the axle parts, check for proper clearance before driving!
***Actual product may differ from what is shown
Wheel Spacer Hardware Kits-M12x1.25-Conical
Extended Lug Bolt Set (10) - M12x1.25 Conical 60° seat, 17mm wrench, Silver, 39mm long We recommend ST wheel hardware for the installation of AZX & DZX Wheel Spacer systems . The wheel bolt length needed for your spacers must be calculated by adding the thickness of the wheel spacers to the lenght of the wheel hardware you used previously. In addition, the type of bolt head, seat type and thread pitch must be taken into consideration. If you are unsure of how to do this you can call our technical support department.
Important Notice! In all cases, the minimum thread engagement must be observed.
M12x1.25 at least 8.0 turns
M12x1.5 at least 6.5 turns
M12x1.75 at least 6.5 turns
M14x1.25 at least 9.0 turns
M14x1.5 at least 7.5 turns
1/2" at least 8.0 turns
Caution: Too long a wheel bolt may result in damage to the axle parts, check for proper clearance before driving!
***Actual product may differ from what is shown
Wheel Spacer Hardware Kits-M12x1.25-Conical
Extended Lug Bolt Set (10) - M12x1.25 Conical 60° seat, 17mm wrench, Silver, 39mm long We recommend ST wheel hardware for the installation of AZX & DZX Wheel Spacer systems . The wheel bolt length needed for your spacers must be calculated by adding the thickness of the wheel spacers to the lenght of the wheel hardware you used previously. In addition, the type of bolt head, seat type and thread pitch must be taken into consideration. If you are unsure of how to do this you can call our technical support department.
Important Notice! In all cases, the minimum thread engagement must be observed.
M12x1.25 at least 8.0 turns
M12x1.5 at least 6.5 turns
M12x1.75 at least 6.5 turns
M14x1.25 at least 9.0 turns
M14x1.5 at least 7.5 turns
1/2" at least 8.0 turns
Caution: Too long a wheel bolt may result in damage to the axle parts, check for proper clearance before driving!